LIFT COMMUNICATION · LIFT-SIDE CONNECTION
IP single-port
2/4-wire extension
2局 configuration
Connect to the duty side through the project IP network. Check the 2-wire/4-wire intercom system, 2局 configuration and single-port layout separately.
Organise intercom groups and check network access
Check the project connection for the single network port and document the two intercom groups separately. Multi-port expansion roles are not assigned to this model.
Intercom connections
Check wiring system, terminals and power for each group in the 2局 configuration. Panel labels do not establish site compatibility.
Project network
Check access points, addressing and console communication. A visible network-port count does not establish compatibility with arbitrary network devices.
INTERCOM SYSTEM · CONNECTIONS
From the lift
to the duty station.
Lift-side intercoms connect to the duty side through an extension and the project IP network. Match the existing intercoms, network access and console configuration.
- AMachine-room intercom
- BCar-roof intercom
- CCar intercom
- DPit intercom
- 01
Lift-side intercoms
Machine room · car roof · car · pit
- 02
IP extension
This model: 2 terminal groups
- 03
Project network
Confirm access and addressing
- 04
Duty station
Select the console for the setup
The four locations are intercom positions; this model has 2 intercom terminal groups. Location count and terminal-group count describe different things. The AI-generated scene is conceptual, not a product image or a terminal or installation wiring drawing.
Three checks before connection
Existing intercom model and wiring system; the terminal groups, supply and actual wiring; project network and duty-console configuration.
Original wiring references
Chinese-language originals. Open when needed.
The drawing contains lift intercoms, power, an extension and different duty consoles. It explains the system relationship; its pictured extension count does not replace this model’s configuration.
The top single-port unit has only 1局 terminals; the lower five-party picture has several groups. These supporting drawings do not replace this model’s 2局 lead photo. The two-party drawing contains a “4G one-key dialling extension” label; it does not establish built-in 4G on this IP unit.
CONFIGURATION & PARAMETERS
Read this model’s panel and configuration
Use this model’s one-port, two-group photo as the reference. The shared IP introduction starts with 1局 and includes other configurations below.
- Panel name
- IP network extension V1.0
- Configuration labels
- 2-wire, 4-wire; 2局
- Visible network port
- One RJ45, marked 10/100M
- Intercom terminals
- 1局 and 2局; each group L, R, G, 12V
- Power terminals
- GND, 12V
Confirm fit using the actual wiring
Intercom groups
Provide models, corresponding lift names and clear wiring photos for the 2局 configuration.
Network and console
Provide console model, access point and addressing; confirm interface configuration and maintenance responsibilities.
Wiring system and power
Check the 2-wire/4-wire version, supply, polarity and location against the actual terminals.
MODEL & SITE FIT
Match the 2局 extension to wiring and communication conditions
Bring separate 1局/2局 intercom and terminal photos, the single network access point, addressing and duty-console model.