LIFT COMMUNICATION · LIFT-SIDE CONNECTION
IP single-port
2/4-wire extension
4-group configuration
Connect to the duty side over the project IP network. This configuration has four intercom terminal groups in its product photo. Match wiring, intercom system and installation conditions to the actual unit.
Check intercom groups and communication separately
Organise intercoms and wiring by groups 1–4, then check the connection conditions for the single network port.
Intercom groups
Here, 4局 identifies the configuration with four intercom terminal groups. Check the intercoms, L/R/G/12V markings and 2-wire/4-wire version for each group.
Project network
Confirm access points, addressing and console communication. Distinguish visible interfaces from the functions available in the actual configuration.
INTERCOM SYSTEM · CONNECTIONS
From the lift
to the duty station.
See how the four lift-side intercom locations relate to the extension, project network and duty station. Then check this model’s interfaces and site conditions.
- AMachine-room intercom
- BCar-roof intercom
- CCar intercom
- DPit intercom
- 01
Lift-side intercoms
Machine room · car roof · car · pit
- 02
IP extension
This model: 4 terminal groups
- 03
Project network
Confirm access and addressing
- 04
Duty station
Select the console for the setup
The four locations are intercom positions; “4 groups” describes this model’s terminal configuration. These counts are not a one-to-one mapping. The AI-generated scene is conceptual, not a product image or a terminal or installation wiring drawing.
Three checks before connection
Existing intercom model and 2-wire/4-wire system; terminal groups, supply and actual wiring; project network and duty-console configuration.
Original wiring references
Chinese-language originals. Open when needed.
CONFIGURATION & PARAMETERS
This model’s panel and configuration
The lead photo labels four groups, 1局 through 4局. The shared introduction starts with one group and does not replace this four-group configuration.
- Panel name
- IP network extension V1.0
- Configuration
- 2-wire / 4-wire; four intercom terminal groups (panel: 4局)
- Visible network ports
- One RJ45 port, marked 10/100M; confirm configured use
- Intercom terminal groups
- 1局, 2局, 3局, 4局; each group L, R, G, 12V
- Power terminals
- GND, 12V
Prepare site information by actual terminal group
Intercom records
Provide models, lift names and clear wiring photos for each of the four groups. Keep the photographed Chinese labels for cross-checking.
Network conditions
Provide access points, addressing and the console model, with the intended role of each network port.
Wiring system and power
Check the 2-wire/4-wire version, supply, polarity and location against the actual terminals.
MODEL & SITE FIT
Confirm the 4-group extension against wiring and communication
Provide intercom models, wiring photos and lift names for each of the four groups, plus the network access point, addressing and duty-console model.