LIFT COMMUNICATION · LIFT-SIDE CONNECTION
IP single-port
2/4-wire extension
1-group configuration
Connect to the duty side over the project IP network. This configuration has one intercom terminal group in its product photo. Match wiring, intercom system and installation conditions to the actual unit.
Check intercom groups and communication separately
Check the existing intercom system, power and terminals for the single group, then plan the network path from the one network port to the console.
Intercom groups
Here, 1局 identifies the configuration with one intercom terminal group. Check the intercoms, L/R/G/12V markings and 2-wire/4-wire version for each group.
Project network
Confirm access points, addressing and console communication. Distinguish visible interfaces from the functions available in the actual configuration.
INTERCOM SYSTEM · CONNECTIONS
From the lift
to the duty station.
Lift-side intercoms connect to the duty side through an extension and the project IP network. Match the existing intercoms, network access and console configuration.
- AMachine-room intercom
- BCar-roof intercom
- CCar intercom
- DPit intercom
- 01
Lift-side intercoms
Machine room · car roof · car · pit
- 02
IP extension
This model: 1 terminal group
- 03
Project network
Confirm access and addressing
- 04
Duty station
Select the console for the setup
The four locations are intercom positions; this model has 1 intercom terminal group. Location count and terminal-group count describe different things. The AI-generated scene is conceptual, not a product image or a terminal or installation wiring drawing.
Three checks before connection
Existing intercom model and wiring system; the terminal groups, supply and actual wiring; project network and duty-console configuration.
Original wiring references
Chinese-language originals. Open when needed.
The image includes intercoms, power, an extension and different duty consoles. It explains the system relationship; confirm group counts and interfaces against this actual model.
The shared IP introduction shows one intercom group at the top, useful for locating interfaces. The multi-group and two-party drawings below are other supporting configurations; this model remains a one-group unit. The two-party drawing’s “4G one-key dialling extension” label does not establish built-in 4G on this IP model.
CONFIGURATION & PARAMETERS
This model’s panel and configuration
The lead photo has one group marked 1局. The series introduction also starts with one group, but other configurations below do not define this model’s count.
- Panel name
- IP network extension V1.0
- Configuration
- 2-wire / 4-wire; one intercom terminal group (panel: 1局)
- Visible network ports
- One RJ45 port, marked 10/100M; confirm configured use
- Intercom terminal groups
- 1局; L, R, G, 12V
- Power terminals
- GND, 12V
Prepare site information by actual terminal group
Intercom records
Provide models, lift names and clear wiring photos for the single group. Keep the photographed Chinese labels for cross-checking.
Network conditions
Provide access points, addressing and the console model, with the intended role of each network port.
Wiring system and power
Check the 2-wire/4-wire version, supply, polarity and location against the actual terminals.
MODEL & SITE FIT
Confirm the 1-group extension against wiring and communication
Bring the existing intercom and terminal-wiring photos for the single group, network access location, addressing plan and duty-console model.